Universal Light Adapter Ring
|
 |
New universal light
adapter ring (ULAR), is designed to help
you reinstall a light when
the original anchors are stripped or
broken.
You will be able to perform the repair
safely and easily.
You no longer have to chip the plaster in
order to replace the manufacturers ring. |
|
| |
| Order No. |
|
Description |
|
Purchase |
| |
|
LARGE NICHE LIGHTS |
|
|
| 3586-0 |
|
ULAR for Pentair and
Starite SS Niche |
|
|
| 3586-1 |
|
ULAR for Anthony to
adapt Pentair Light |
|
|
| 3586-2 |
|
ULAR for Pentair
Plastic Niche |
|
|
| |
|
|
|
|
| |
|
SMALL NICHE LIGHTS |
|
|
| 3586-3 |
|
ULAR for Pentair and
Starite SS Niche |
|
|
| 3586-4 |
|
ULAR for Pentair
Plastic Niche |
|
|
|
| |
NOTE:
Be sure you identify the light you are going to
be working on. It is
of the utmost importance that you use the correct
part for the proper light. |
| |
| Installation
of the Light Ring |
1. Identify your light
2. Bring the old one up on the deck
3. Clean all the plaster and/debris from
the inside of the niche
4. Remove the bolt from the ring, and
slide the ring around the light cord
5. Put the old back on the ring, squeeze
the ring and slide into the niche
6. Adjust both brackets so they are flush
with the wall of the pool
7. With two 7/16 in open end wrenchs
expand the nuts in the opposite direction
to wedge the ring in place. |
|
